How do I use the Jarvis programmable memory handset?

Programming Memory Presets

To program your memory presets, raise or lower your Jarvis to your preferred height. Then, press the M icon followed by one of the four numbers you want to preset. This number will return Jarvis to your preferred height from now on.

Other Jarvis Desk Features

Access the menu by holding down M for 3 seconds until “Lock/Unlock desk” appears on the screen. You can then use ▲ or ▼ to navigate through the menu. Pressing “1” selects the feature you want to change and also confirms your selection. Pressing “4” takes you back to the main menu.

Lock/Unlock Jarvis

This prevents changes to the height by locking access to the menu settings. Unlock will restore access to these features. 

Max Height

This limits how high your Jarvis can go. Simply raise Jarvis to the desired maximum height and navigate to “Max height” on the menu, then press “1” to confirm.

Minimum height

This limits how low your Jarvis can go. Move Jarvis to the desired minimum height, navigate to “Min height” on the menu, then press “1” to confirm.


Prefer to work in centimeters instead of inches? Choose the unit of measurement you’d like under the “Units” menu option.


To help prevent damage, Jarvis is outfitted with an accelerometer that stops it if it runs into something. You can customize the sensitivity with the anti-collision options.

Screen Brightness

Adjust the screen brightness on your memory handset to the level that suits you.

Button brightness

You can also adjust the button brightness on your memory handset. Choose from three brightness levels to help you most easily navigate through your presets and menu options.

Memory preset mode

Use One touch to move your Jarvis to a memory preset height with the touch of a button, or use Constant touch and keep your finger on the button until Jarvis gets to the memory preset height.

Calibrate height

To calibrate your handset’s height display, lower Jarvis all the way down and then use a tape measure to determine the height from the top of your desktop to the floor. Select the Calibrate height menu option and use the ▲ or ▼ icons to adjust the height readout to match your previously measured height.

Was this article helpful?
0 out of 2 found this helpful
Have more questions? Submit a request

Need more help?


Monday - Friday
9am - 4pm PST

Start chatting


Monday - Friday
9am - 4pm PST


Get in touch