How to install a Powered Grommet
- Remove the basic grommet cover from the grommet hole. The powered grommet cannot be installed on top of the basic grommet cover.
- Twist the “locking ring” off the bottom of the unit.
- Drop the power grommet into the grommet hole so that the rubber washer is between the desktop surface and the unit.
- Screw the locking ring back onto the bottom of the powered grommet until it’s tight against the underside of the desk.
For Dark Bamboo Desktops
The Jarvis Dark Bamboo tops have a slightly different drill template and require a non-standard locking ring to attach the Powered Grommet. Please contact us and we'll ship you the special locking ring free of charge.